NEWS
What is the root cause of the reduction in the service life of the floor machine batteries?
Time：
2024-05-25
Scrubber is the cleaning industry now more popular class of equipment, mainly used in a variety of shopping malls, office buildings, enterprises, factories, etc., with the development of science and technology, the use of scrubbers is becoming more and more common, many users in the daily use of scrubber batteries tend to be less concerned about the use of the situation, to be the battery appeared abnormal situation when they contacted the battery manufacturer to ask the reason, or will be the battery back to the factory for maintenance, the occurrence of a series of cases will only reduce the efficiency of the staff and losses. This series of circumstances will only reduce the efficiency of the staff and losses, so what is the root cause of the reduction in the service life of the floor machine batteries?
Scrubber is the cleaning industry now more popular class of equipment, mainly used in a variety of shopping malls, office buildings, enterprises, factories, etc., with the development of science and technology, the use of scrubbers is becoming more and more common, many users in the daily use of scrubber batteries tend to be less concerned about the use of the situation, to be the battery appeared abnormal situation when they contacted the battery manufacturer to ask the reason, or will be the battery back to the factory for maintenance, the occurrence of a series of cases will only reduce the efficiency of the staff and losses. This series of circumstances will only reduce the efficiency of the staff and losses, so what is the root cause of the reduction in the service life of the floor machine batteries?
1. not in accordance with the principle of shallow charging and discharging charging / discharging: most users understand that shallow charging and discharging this reasoning, but a long time to use down will gradually forget such principles, in fact, the operation is very simple.
a. After cleaning the ground, pay attention to check the remaining power of the floor machine batteries, when the power in the 20% -30% or so can be charged, to avoid power loss caused by low power. Long time to make the floor machine batteries in a state of power loss will cause battery damage.
b. Because each group of batteries, charger specifications are different, so the charging time is also different. Take 24v100AH floor machine batteries and 30A charger, the calculation method is: 100AH/30A = 3.33H, the actual before and after the section has a pre-charging and trickle charging, basically in 4 ~ 4.5 hours can be full, calculate the charging time, when the battery is fully charged in a timely manner after the power supply is disconnected, so as not to cause overcharging.
2. did not use the original charger: the original charger for the floor machine batteries is very important, as the saying goes, "three points to see the quality, seven points rely on charging", now there are many low-quality chargers on the market, the charger's current parameters and the battery does not match the long-term use of the battery will cause battery aging.
3. Battery loss: general use of the scrubber should check the remaining power, PRD lithium batteries in the form of low power will remind the user to charge through the voice broadcast, but ordinary batteries will need to be viewed by the user, timely charging. Long-term placement of unused batteries also need to be fully charged and placed, and then need to regularly check the amount of power.
4. Daily do not pay attention to cleaning and maintenance: in the ordinary use of the process, the floor machine batteries will also accumulate dust, will clean up the dust, maintain cleanliness, so as not to affect the performance of the battery.
PRD is a commitment to cleaning equipment battery R & D, production, custom set in one of the lithium iron phosphate battery suppliers, PRD has 6000 production plant, to achieve freedom of production, independent charging system, self-research BMS protection board management system, voice warning system, etc., to improve the user's sense of experience while enhancing the safety and high efficiency of the equipment.
Tel：
E-mail：
Whatsapp：
Add：
Factory Building 25-26, Liandong U-Valley, No. 566 Xitai Road, Xinwu District, Wuxi City
QUICK NAVIGATION
Copyright © 2023Wuxi Quanyu Electronic Technology Co., Ltd 丨 Business License
